So what is CAD? And how is it used in construction? There has been a recent push towards increasing the use of technology in construction. This is benefitting the industry, as many tools can cut back timelines and improve construction. That being said, there are a lot of new technologies and how they will benefit a specific business is not always clear. To clear up one of theses construction technologies, we’ll cover what is CAD in construction and how it’s used to benefit the industry.
Is CAD 2D or 3D?
A common misconception surrounding CAD is that it is a 3D modeling tool only. However, CAD can be used as a 2D drawing tool as well. Construction designers might use a CAD tool that only works in 2D while architects might work in a 3D tool that has a 2D converter. It is highly dependent upon the actual platform used. This can be convenient because a company might only use a 2D tool and can pay for that tool alone. However, as construction centers around 3D models and informational models, it will be harder for companies only to use a 2D tool.
What is CAD Used For In Construction
Reading the above paragraphs, one might wonder what is CAD used for in construction? There are a lot of uses for CAD in construction. Subcontractor’s designers can take the drawings made by the architect and add in additional needed details to ensure constructability. From there they have a plan that they can work off of and check their work against. Companies have already done this to a degree of success. Some companies were able to use a combination of drones and 3D models to notice issues with the construction. Specifically, a company can overlay their live drone footage with the model. They could note that the foundation would be off and make corrections.
CAD benefits contractors because the drawings and plans can be easily stored in the cloud. This allows for contractors to use their plans at any location. Also, if they are included in a shared file for the project, they can easily see changes to the plans. So a subcontractor could quickly determine which changes were made, by who, and how it will impact construction.
Another benefit of CAD software is it is more accurate than manual drawings. It’s easier for designers to ensure accuracy in their drawings through CAD software then it is when it’s manual. And it’s easier for subcontractors to add details into than it is in manual drawings.
CANTER CADD being ISO 9001:2015 certified, the best CAD training institute can make a candidate’s profile strong and eligible to grab the trending jobs in the market. Moreover, the courses are offered by highly skilled and trained professionals to offer valuable knowledge to the candidates.
Locate CANTER CADD – The Best ansys Training Institute in Hyderabad-Mehdipatnam-Ameerpet-Himayatnagar-Dilsukhnagar-Habsiguda-Boduppal-ECIL-Santoshnagar-Chandanagar-Alwal-Kukatpally-Secunderabad-Warangal-Hanamkonda, Bangalore-Marathahalli-BTMLayout-Electronic City-Yelahanka-Banashankari-JPNagar-Srinagar-Hulimavu-Chamrajpet-Horamavu-Vidyaranyapuram, Andhra Pradesh-Guntur-Nellore-Kurnool-Rajahmundry-Tirupati-Dwarakanagar-Vizag-Vijayawada, Delhi NCR-LaxmiNagar-RajendraPlace-Rohini-Adhchini-Kalu-Sarai-, Pune-Akurdi, Tamil Nadu-Coimbatore, Uttar Pradesh--Gazhiabad-Meerut, Kerala, , Mumbai, Nagpur
